|Voltage:||300V||Retainer Housing:||(PA66) UL94V-2|
flat ribbon cable,
molex ribbon cable
UL 1007/1571/1061 300V Rainbow Ribbon Cable with PVC Housing Connector for Printer
A color-coded ribbon cable, a.k.a. as a rainbow ribbon cable or twist and flat, uses a repeating pattern of colors as the identification for the conductors. This pattern typically uses the industry standard resistor color code where brown would be used for conductor and pin 1, 11, and 21, red being used for conductor and pin 2, 12, and 22, etc. The color-coded ribbon cables can consist of insulated conductors pulled in parallel to each other or be manufactured with twisted pairs where there is a repeating flat section for termination on specific length intervals.
An edge marked cable is usually marked with a stripe on the first conductor which is connected to pin 1 on the connector. The edge marking can be any color, but typically is based on the pitch or center spacing of the cable. For instance, 0.050” pitch cable is typically red edge marked. This method of identification is suitable for cables that consist of two or more IDC connectors with every connector connecting to every wire, but is somewhat less helpful when individual wires or small groups of wires must be terminated separately. In this case there would be additional marking applied to specified conductors to allow for proper identification and termination.
|PTV 1.25-9||1.9||19.0||10.0||4.3||RED||Section of lead:0.5-1.5mm²|
|PTV 1.25-10||1.9||20.0||USA Spec22-16|
|PTV 1.25-13||1.9||23.0||Material:Purple Copper|
|PTV 2-9||1.9||19.0||10.0||4.9||BLUE||Section of lead:1.5-2.5mm²|
|PTV 2-10||1.9||20.0||USA Spec16-14|
|PTV 2-13||1.9||23.0||Material:Purple Copper|
|PTV 3.5-10||2.8||20.0||13.0||6.2||BLACK||Section of lead:2.5-4mm² USA Spec14-12 Imax=34A|
|PTV 3.5-13||2.8||25.5||Material:Purple Copper Thickness:1.0mm|
|PTV 5.5-13||2.8||25.5||13.0||6.7||YELLOW||Section of lead:4-6mm² USA Spec12-10 Imax=48A|
|Material:Purple Copper Thickness:1.0mm|
There are quite a handful of ribbon cable connectors that are available with IDC termination. They are:
BT 224 connector
Another name for BT 224 connector is IDC connector. A lot of standards such as BS 9525- F0023, DIN 41651, and MIL-C- 83505 define this connector type.
D- Subminiature connector
These connectors are not as common as the crimp and solder bucket types.
DIN 41612 connector
It is a connector type that is very common among different suppliers that operate together. Although, the standard is now in an internationally standard form of IEC 60603-2 and EN 60603-2
PCB transition headers
PCB represents the Printed circuit board. It is a connector type with two rolls of pins with the same spacing as BT 224 connectors. For efficiency, these pins connect directly to the PCB.
This connector possesses high low contact resistance and long life. It also offers a cost-effective means of connecting PCB to other applications.
Micro Ribbon connector
There are a host of names for the ribbon connectors. These names are a telco, 25 pair, miniature delta ribbon, mini D ribbon, MDR, Amphenol or even miniature ribbon connector. Micro ribbon connector possesses a shape similar to D- Subminiature connector with two parallel rows of contact. Its contacts are not pinning. Rather, they are small bands of metal in the form of ribbons.
The female connectors of the micro ribbon connector possess bail lock that connects it to the male counterpart for a secure connection.
The DIL headers possess pins with the same spacing as standard DIL ICs. They connect two Printed circuit Boards. Also, they work well with appropriate DIL socket to form a plug and even socket pair.
Q1:Do you accept custom products (OEM)?
A1:Yes, we have customized the wire harness for our customers, just send us samples or drawings of the products you need.
Q2:Can you provide free samples?
A2:Of course, if there is a stock, the sample will be provided free of charge, but the transportation fee will be charged.
Q3:Do you have a minimum order quantity requirement?
A3:Our prices will be adjusted based on the number of products ordered. The more the quantity, the cheaper it is. Some products are not available at the MOQ.
Q4:How long does it take for general delivery?
A4:We have a lot of products in stock.We can send the stock products in 3 work days.If without stock,or stock is not enough, we will check the delivery time
Q5:How to ship my order ? Is it safe?
A5:For small package, we will send it by Express, tsuch as DHL,FedEx,UPS.
Q6:What payment methods do you support?
A6:We accept T/T (wire transfer), Western Union and Paypal. Please contact us for more details on pricing, packaging, shipping and discounts.
Our design and manufacturing process follows a set protocol towards maximizing a project’s budget, meeting project milestones and ensuring the absolute functionality of the final product. Here’s a quick snapshot of a few key elements of the process:
Needs Assessment: we will examine all of the specifications for your project and seek to understand all of the elements at play for how and where the system will be employed. This is where initial design elements are started to be placed together which will later be developed into working prototypes.
Extruding: our in-house extruding machine can extrude conductors as small as 34 gauge and all the way up to 12 gauge. These conductors make up the building blocks of both cable assemblies and wire harnesses. They can be stranded or braided, filled with insulation, wraps, shields, and other components depending on the project needs. Connectors, over molds, terminations, and housings help bring the cables and wires together within an electronic system.
Prototyping runs: we will usually produce several iterations to not only test a unique combination of components for accomplishing a given task, but will also look at how those components are sourced to see if a given assembly is viable.
Contact Person: Sarah