|Housing:||Pitch2.0mm/2.54mm/3.0mm /5.0mm||Cable Length:||Make According To Your Requirement|
wire harness and cable assembly,
backup camera wiring harness
OEM Manufacturer Wiring Harness Assembly with Model 5557 Connector for Coffee Machine
Once a design is established, the process of building a wire harness starts with the development of a schematic that is used to create the manufacturing paperwork and the assembly board for the harness. The assembly board, or pin board, is a full-size diagram of the harness and shows all of the components and their location and also serves as the workbench for the harness. The wires needed for the harness are supplied on a master reel and are cut to the desired length and identified with printing or labeling if necessary. Once cut to the proper length, the wires are stripped to expose the uninsulated conductor and then fitted with any required terminals or connector housings. These wires and components then are put on the pin board and are bound together by any necessary straps, cable ties, cable lacing, sleeves, tapes, weaves of extruded string, or any combination of these.
In spite of the desire to increase automation, wire harnesses, in general, continue to be manufactured by hand because of the many different processes involved.
Wire: A single conductor (usually made of copper or aluminum). Wires are low resistance, low cost, and measured by “gauge”. The smaller the gauge, the thicker the wire. The thicker the wire, the higher the risk of damage resulting from a burned fuse.
Open up a wiring harness, and you’ll find multiple wires, each donning its own single layer of exterior covering. This covering is typically made from a thermoset or thermoplastic material, and serves two primary purposes:
The jacketing material that covers each wire does little to protect the wire itself, which is why this solution is typically employed in applications where moisture, dust, temperature and friction are not a concern—for example, when the wires will exist inside a housing unit or shell, like a remote control.
If this overview still doesn’t provide you with a clear answer, don’t hesitate to reach out to a custom connector manufacturer. They are experts at outfitting products with the right electrical components given all specifications and can custom design an electrical system that meets all your project needs, including cost and turn-around time.
Interested in learning more about the impact of your cable or connector decision on the overall success of your product? Get our articles delivered straight to your email by subscribing to our blog.
|JIASHAN HARNESS EQUIPMENT||NO.||QUANTITY|
|Automatic Peeling and Terminal Machine||ZX-2000||4|
|Automatic Pipe Cutting Machine||WG-251||2|
|Automatic Servo Single-head Dip Tin Machine||ZX-03D||2|
|High Speed Terminal Machine||ZX-02A||3|
|Pneumatic Peeling Machine||ZX-310||6|
|Automatic Dip Tin Machine||ZX-06P+T||10|
|Automatic Twisting and Tin-Dipping Machine||WG-03A||1|
|Automatic Corrugated Pipe Cutting Machine||ZX-1200||1|
|Automatic Single Head Single Grain Terminal Machine||ZX-02B||5|
Jiashan Harness warrants the manufactured product (“Product”) against material defects in material and workmanship under normal use and service for a period of One (1) Year from the date of invoice.
Jiashan Harness, at its option, shall either repair the Product, replace it with the same or equivalent product.
This express limited warranty is extended by Jiashan Harness to the purchaser of the Product and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by Jiashan Harness. Jiashan Harness cannot be responsible in any way for any ancillary equipment not furnished by Jiashan Harness, which is attached to or used in connection with the Product.
This warranty does not cover defects or damage resulting from use of the Product in other than its normal and customary manner; defects or damage from misuse, accident, water or neglect; defects or damage from improper testing, operation, alteration, modification; or adjustment to the Product without Jiashan Hanress’s prior written consent.
This warranty sets forth the full extent of Jiashan Harness’s responsibilities regarding the Product. Repair or replacement at Jiashan Hanress’s option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. JIASHAN HARNESS DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF JIASHAN HARNESS AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL JIASHAN HARNESS BE LIABLE FOR INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES.
With the exception of stranded wire, which we'll talk about below, it's important to make sure the ends of all wires are lined up before twisting on the wire nut connector. ... You don’t have to twist the wires together before you screw on the connector.
Contact Person: Sarah