|Cable:||Medical Wire Cable||Pin:||4|
|Application:||Medical Equipment CT Scanner||Color:||Black|
medical cable assemblies,
amp wiring harness
Precision Interface Medical Wire Harness Premium Quality for CT Scanner
A wire harness is a group of wires that have been bundled together to transmit a signal or electrical power. Though often confused for cable assemblies, wire harnesses serve their own unique purpose. Both carry electricity, but wires are made up of strands of conductive material and are used for applications beyond transmitting electricity. Cables are made up of wires and an insulation material and tend to be better protected than wires.
To manufacture a wire harness, the assembly process is done manually instead of through automation. To assemble a wire harness:
The wires are cut to the desired length and labeled
The ends of the wires are stripped to expose the uninsulated conductor and fitted with any required terminals or connector housings
The wires and components are then assembled on the pin-board to the desired specification and then bound together
|Name||Premium Quality Wire Hanress for CT Scanner|
|Material||Insert Ternimal : Tinned Copper|
|2.8 Model||Lenth : 16 Tickness: 0.5mm AWG23-AWG20|
|4.8 Model||Lenth : 17 Tickness: 0.5mm AWG23-AWG18|
|6.3 Model||Lenth : 18 Tickness: 0.5mm AWG18-AWG15|
|Delivery Time||1 - 4 Weeks|
|Price||Direct Factory Price|
Put on the safety glasses. ...
Cut the outer cover on the wiring harness open at the suspected bad spot. ...
Turn on the ohm meter and place the dial on the ohms reading. ...
Disconnect any devices from each end of the wire being tested and place them where they are not touching any other wires if no visible trouble was found.
The entire wiring harness could not have gone bad unless you had a massive short circuit and fried all your wires. Replacing the entire wiring harness is a big job since everything needs to be unplugged, parts need to be taken out, and assembled back together
Jiashan Harness is a full-service custom cable assembly contract manufacturer with capabilities to serve both large and smaller quantity needs.
Simple to complex cable assemblies
Design and engineering to assist with concepts, layout and manufacturability
Prototypes and samples for design validation, including rapid prototyping and short run manufacturing prior to full production
Automatic state-of-the-art cut, strip, and terminating equipment to ensure accuracy
Full-scale supply chain management for true “turnkey” solutions, including component sourcing and inventory management (VMI, Kanban, JIT, and custom stocking programs)
Custom packaging and kitting programs
Comprehensive verification, testing and certification
Offshore manufacturing available for high-labor or high-volume cable assemblies
Dedicated work cells for seasonal or sales demand fluctuations
Effective program management
Contact Person: Sarah