|Connector:||Molex 3.0 2x2P Male||Terminal:||Multi-Functional Braided|
|Retainer Housing:||(PA66) UL94V-2||Warranty:||12Month|
wire harness and cable assembly,
backup camera wiring harness
Multi-Functional Braided Wiring Harness Assembly with Molex 3.0 2x2P male for Genset
Harness Assemblies Manufacturer
If your company / production facility is in need of a wire harness assembly solution – Jiashan Harness is here for you. We are among the veteran • wire assembly manufacturers and wire harness manufacturers in China, producing custom electrical and electronic solutions for our clients for nearly 15 years. With a rock-solid reputation for quality and speed of delivery, we can assure you that all your needs will be satisfied.
We understand that every industry and company have their specific needs and setup, and therefore every wire harness we produce is customized specifically to your situation. We have a full understanding of the different industries since we have clients that range from the medical field to automotive manufacturers, power generation facilities and many more.We bring value to our clients, not only helping to create customized solutions but also by making sure our solutions increase your assembly’s performance and productivity.
|PTV 1.25-9||1.9||19.0||10.0||4.3||RED||Section of lead:0.5-1.5mm²|
|PTV 1.25-10||1.9||20.0||USA Spec22-16|
|PTV 1.25-13||1.9||23.0||Material:Purple Copper|
|PTV 2-9||1.9||19.0||10.0||4.9||BLUE||Section of lead:1.5-2.5mm²|
|PTV 2-10||1.9||20.0||USA Spec16-14|
|PTV 2-13||1.9||23.0||Material:Purple Copper|
|PTV 3.5-10||2.8||20.0||13.0||6.2||BLACK||Section of lead:2.5-4mm² USA Spec14-12 Imax=34A|
|PTV 3.5-13||2.8||25.5||Material:Purple Copper Thickness:1.0mm|
|PTV 5.5-13||2.8||25.5||13.0||6.7||YELLOW||Section of lead:4-6mm² USA Spec12-10 Imax=48A|
|Material:Purple Copper Thickness:1.0mm|
Wire: A single conductor (usually made of copper or aluminum). Wires are low resistance, low cost, and measured by “gauge”. The smaller the gauge, the thicker the wire. The thicker the wire, the higher the risk of damage resulting from a burned fuse.
Open up a wiring harness, and you’ll find multiple wires, each donning its own single layer of exterior covering. This covering is typically made from a thermoset or thermoplastic material, and serves two primary purposes:
The jacketing material that covers each wire does little to protect the wire itself, which is why this solution is typically employed in applications where moisture, dust, temperature and friction are not a concern—for example, when the wires will exist inside a housing unit or shell, like a remote control.
If this overview still doesn’t provide you with a clear answer, don’t hesitate to reach out to a custom connector manufacturer. They are experts at outfitting products with the right electrical components given all specifications and can custom design an electrical system that meets all your project needs, including cost and turn-around time.
Interested in learning more about the impact of your cable or connector decision on the overall success of your product? Get our articles delivered straight to your email by subscribing to our blog.
Q1:Do you accept custom products (OEM)?
A1:Yes, we have customized the wire harness for our customers, just send us samples or drawings of the products you need.
Q2:Can you provide free samples?
A2:Of course, if there is a stock, the sample will be provided free of charge, but the transportation fee will be charged.
Q3:Do you have a minimum order quantity requirement?
A3:Our prices will be adjusted based on the number of products ordered. The more the quantity, the cheaper it is. Some products are not available at the MOQ.
Q4:How long does it take for general delivery?
A4:We have a lot of products in stock.We can send the stock products in 3 work days.If without stock,or stock is not enough, we will check the delivery time
Q5:How to ship my order ? Is it safe?
A5:For small package, we will send it by Express, tsuch as DHL,FedEx,UPS.
Q6:What payment methods do you support?
A6:We accept T/T (wire transfer), Western Union and Paypal. Please contact us for more details on pricing, packaging, shipping and discounts.
Our design and manufacturing process follows a set protocol towards maximizing a project’s budget, meeting project milestones and ensuring the absolute functionality of the final product. Here’s a quick snapshot of a few key elements of the process:
Needs Assessment: we will examine all of the specifications for your project and seek to understand all of the elements at play for how and where the system will be employed. This is where initial design elements are started to be placed together which will later be developed into working prototypes.
Extruding: our in-house extruding machine can extrude conductors as small as 34 gauge and all the way up to 12 gauge. These conductors make up the building blocks of both cable assemblies and wire harnesses. They can be stranded or braided, filled with insulation, wraps, shields, and other components depending on the project needs. Connectors, over molds, terminations, and housings help bring the cables and wires together within an electronic system.
Prototyping runs: we will usually produce several iterations to not only test a unique combination of components for accomplishing a given task, but will also look at how those components are sourced to see if a given assembly is viable.
Contact Person: Sarah