|Connector:||Butt Splice Connector||Terminal:||PTV Type Pin Pre-Insulating|
|Retainer Housing:||(PA66) UL94V-2||Warranty:||12Month|
led screen cable,
terminal battery cable
PTV Type Pin Pre-Insulating Terminal Cable with Butt Splice Connector for Agricultural Equipment
Butt splice connectors are commonly used to connect or splice two wires together to lengthen, change, or repair an electrical circuit. Wiring Products carries 5 types of butt splices - non-insulated or bare butt splices, vinyl insulated butt splices, nylon insulated butt splices, heat shrink butt splices, and high temperature butt splices. All of our butt splice connectors are made from tin plated copper for maximum conductivity and holding strength, except for the high temperature splices which are made from nickel plated steel to handle temperatures up to 900°F. With a maximum voltage rating of 600 volts, our butt splice connectors are suitable for any electrical requirement including automotive, marine, commercial, and industrial applications.
|PTV 1.25-9||1.9||19.0||10.0||4.3||RED||Section of lead:0.5-1.5mm²|
|PTV 1.25-10||1.9||20.0||USA Spec22-16|
|PTV 1.25-13||1.9||23.0||Material:Purple Copper|
|PTV 2-9||1.9||19.0||10.0||4.9||BLUE||Section of lead:1.5-2.5mm²|
|PTV 2-10||1.9||20.0||USA Spec16-14|
|PTV 2-13||1.9||23.0||Material:Purple Copper|
|PTV 3.5-10||2.8||20.0||13.0||6.2||BLACK||Section of lead:2.5-4mm² USA Spec14-12 Imax=34A|
|PTV 3.5-13||2.8||25.5||Material:Purple Copper Thickness:1.0mm|
|PTV 5.5-13||2.8||25.5||13.0||6.7||YELLOW||Section of lead:4-6mm² USA Spec12-10 Imax=48A|
|Material:Purple Copper Thickness:1.0mm|
A butt connector is a wire terminal that is double ended female wire connector. Ring terminals are equipped with a ring-shaped connection end that can easily connect awire to hardware such as a screw or stud. Push-on wire terminals are also very common. ... Spade terminals, like ring terminals, help to attach to hardware.
Q1:Do you accept custom products (OEM)?
A1:Yes, we have customized the wire harness for our customers, just send us samples or drawings of the products you need.
Q2:Can you provide free samples?
A2:Of course, if there is a stock, the sample will be provided free of charge, but the transportation fee will be charged.
Q3:Do you have a minimum order quantity requirement?
A3:Our prices will be adjusted based on the number of products ordered. The more the quantity, the cheaper it is. Some products are not available at the MOQ.
Q4:How long does it take for general delivery?
A4:We have a lot of products in stock.We can send the stock products in 3 work days.If without stock,or stock is not enough, we will check the delivery time
Q5:How to ship my order ? Is it safe?
A5:For small package, we will send it by Express, tsuch as DHL,FedEx,UPS.
Q6:What payment methods do you support?
A6:We accept T/T (wire transfer), Western Union and Paypal. Please contact us for more details on pricing, packaging, shipping and discounts.
Our design and manufacturing process follows a set protocol towards maximizing a project’s budget, meeting project milestones and ensuring the absolute functionality of the final product. Here’s a quick snapshot of a few key elements of the process:
Needs Assessment: we will examine all of the specifications for your project and seek to understand all of the elements at play for how and where the system will be employed. This is where initial design elements are started to be placed together which will later be developed into working prototypes.
Extruding: our in-house extruding machine can extrude conductors as small as 34 gauge and all the way up to 12 gauge. These conductors make up the building blocks of both cable assemblies and wire harnesses. They can be stranded or braided, filled with insulation, wraps, shields, and other components depending on the project needs. Connectors, over molds, terminations, and housings help bring the cables and wires together within an electronic system.
Prototyping runs: we will usually produce several iterations to not only test a unique combination of components for accomplishing a given task, but will also look at how those components are sourced to see if a given assembly is viable.
Contact Person: Sarah